What Are The 7 Points To Pay Attention To When Welding With A Fully Automatic Welding Robot?

1. When choosing a fully automatic welding robot, it is important to pay attention to the selection of auxiliary welding accessories. If auxiliary accessories are not used, the welding effect will also be affected to a certain extent.
2. Before running after installation, the teaching operation should be carried out first. The operator must teach the welding robot the trajectory of the welding gun and set welding conditions. Because teaching is necessary, robots are not designed for welding a small number of different products.
3. As the setting of welding conditions is determined by the teaching operator, the operator must input the welding program, welding gun posture and angle, including current, voltage, speed, and other welding conditions during the teaching. This requires the teaching operator to have a good understanding of welding knowledge and welding skills.
4. Pay attention to checking the accuracy of the welded parts, as the welding robot performs repetitive actions based on the program, with a trajectory accuracy of ± 0.1mm, and repeats the actions with this accuracy. When the welding deviation exceeds the welding wire radius, the welding effect may not be good, so the accuracy of the welded part should be maintained within the welding wire radius.
5. Pay attention to the operating environment of the machine. The equipment should be placed in a waterproof, dry, and dust-free place, and the welding machine and control cabinet should be at a certain distance from the ground.
6. Normally, welding robots will calibrate their original point orientation before leaving the factory, but during equipment operation, it is still important to pay attention to measuring the middle orientation and checking the east-west orientation.
7. Finally, it is necessary to check the protective measures. A protective fence should be installed on the outside of the fully automatic welding robot to prevent unrelated personnel from approaching. When operating the homework, the staff need to wear protective equipment and equip the start button at the position of the robot to avoid potential hazards. They also need to master certain knowledge about operating the robot to avoid uncontrollable malfunctions.