Dec 02, 2025 Leave a message

Application of 3D Line Laser Scanning in Pre-Welding Inspection: Eliminating Quality Hazards at the Source

Technical Analysis:

1. Working Principle: The robot, equipped with a 3D laser sensor, scans the weld seam of the workpiece along a pre-set path at the welding front. The sensor quickly acquires massive amounts of 3D point cloud data of the workpiece surface.

2. Inspection Content:

    Assembly Gap and Misalignment: Accurately measures the actual value of the gap at the root of the bevel and the height difference between the two plates.

    Bevel Dimensions: Detects whether the bevel angle and blunt edge dimensions are within acceptable limits.

3. Intelligent Decision-Making:

    Pass/Fail Judgment: The system compares the measured data with process standards and automatically determines whether the workpiece is permissible for welding. For non-compliant parts, an alarm is immediately triggered, avoiding waste of welding materials and time.

    Adaptive Welding: For deviations within acceptable limits, the system can automatically fine-tune the robot's welding trajectory, oscillation width, or welding parameters, achieving "perception-based" adaptive welding.

 

System Value:

    This technology moves the quality control node forward, realizing "preventative" production management. It is particularly suitable for fields with extremely high welding quality requirements and where perfect workpiece consistency is difficult to guarantee, such as heavy equipment and pressure vessels.

Equip your welding robot with a "pre-inspection eye" to achieve the ultimate goal of zero-defect welding. Please contact us: Changzhou Anchuang Intelligent Equipment Co., Ltd. Tel/WhatsApp/WeChat: +86 15151971897 Email: nicole@anchuangwelding.com Website: www.anchuangwelding.com

Send Inquiry

whatsapp

Phone

E-mail

Inquiry