I. The Requirements for Fixtures in Robotic Welding are Far Higher Than in Manual Welding
Manual welding can "find the position," but robots cannot.
Robot welding fixtures must meet the following requirements:
- Stable positioning reference
- Sufficient structural rigidity
- Repeatable clamping accuracy
II. Common Design Mistakes in Welding Fixtures
When working on modification projects, we often see:
- Too few positioning points
- Insufficient structural rigidity
- Welding thermal deformation not considered
The end result is:
👉 Welding parameters are adjusted to increasingly extreme levels, but the problem persists.
III. Welding Fixtures Must Be Designed Integrat with the Welding System
At Changzhou Anchuang Intelligent Equipment Co., Ltd., welding fixture design always considers the following simultaneously:
- Robot welding torch posture
- Welding sequence
- Positioner flipping angle
Welding fixtures are not "auxiliary parts," but a core component of the welding system.
📞 +86 15151971897
📧 nicole@anchuangwelding.com
🌐 www.anchuangwelding.com
